2022 Exhaust/Header options

rawsoncj

New member
Hey legends - what are people using as hole stoppers/bungs to cover the second drilled hole when removing baffles?

I had ordered Akrapovic genuine ones ~6 weeks ago and I'm losing confidence they will actually arrive.
The Latvian Post tracking has gone radio silent.
I got tired of waiting for the Akrapovic grommets to get here (NZ) from the States, so I picked up some basic rubber blanking grommets from Mitre 10 for a couple bucks.

I lost one of the OEM grommets somehow, and I had to drill out the retaining bolt on the upper baffle, which inadvertently caused me to make the pilot hole bigger than it needed to be, so there's a 5/8-inch grommet in that hole. So all up I have one original grommet, two 1/2-inch Mitre 10 grommets, and one 5/8-inch Mitre 10 grommet.

The Akra grommets still haven't arrived over a month after I ordered them, and the place I ordered them from issued a refund without me asking them to, so I'm thinking they'll probably never arrive.
 

Breto

Well-known member
Yeah did the same mate…bearing shop…13 cents each….perfect fit but they are in a box now…rockin the TOCE low Mount. Very very nice…👍😎
 

motocroft

Active member
Well my Akra grommets finally showed up and everything is closed in Melbourne (still) so I didn't have a choice to run out to a local hardware :(
In the end all worked out.
 

Amrit

New member
Well my Akra grommets finally showed up and everything is closed in Melbourne (still) so I didn't have a choice to run out to a local hardware :(
In the end all worked out.
Hi,
I would like to take db killers from my 22 carbon as well.
Was your db killers were welded or was it simple extraction?
Any obvious tell that they are not welded without drilling?
(Am in Adelaide, hoping all Aussie bikes will be same)
thanks
 

motocroft

Active member
Hi,
I would like to take db killers from my 22 carbon as well.
Was your db killers were welded or was it simple extraction?
Any obvious tell that they are not welded without drilling?
(Am in Adelaide, hoping all Aussie bikes will be same)
thanks
Spot welded unfortunately.
 

AllAroundRider

New member
Yeah did the same mate…bearing shop…13 cents each….perfect fit but they are in a box now…rockin the TOCE low Mount. Very very nice…👍😎
Hows the quality of the toce system? I'm looking to get some catless headers for my 22 as I like the look of the dual mufflers but toce is the only header system i can find that will fit the 22.
 

Breto

Well-known member
A
Hows the quality of the toce system? I'm looking to get some catless headers for my 22 as I like the look of the dual mufflers but toce is the only header system i can find that will fit the 22
As a full system the low Mount is exceptional in quality and workmanship. I fully recommend it…even when I had a warranty claim, Justin at TOCE was awesome…👍😎🇦🇺
 

AllAroundRider

New member
A

As a full system the low Mount is exceptional in quality and workmanship. I fully recommend it…even when I had a warranty claim, Justin at TOCE was awesome…👍😎🇦🇺
Thankyou! there's only maybe 3 videos on youtube about it and none are reviews. Cheers!
 

ferraiolo1

2021-2024 IMR Ambassador
Staff member
Hows the quality of the toce system? I'm looking to get some catless headers for my 22 as I like the look of the dual mufflers but toce is the only header system i can find that will fit the 22.


 

edgelett

Well-known member
I’ve done a couple but they are mainly fit up and running on the spot. Mikes done a few while riding…👍
I've been trying to sort my action camera out properly over the last few months, hope to get some riding footage soon.

Will also do a 'long term ownership' vid of the Toce at some stage too.
 

Walrus

Active member
Just to chime in.
Bassini offered a de-cat slip on until 2022. I'm told they're working on an oval connector Just got note today my TOCE full exhaust has shipped.
 

Breto

Well-known member
I've been trying to sort my action camera out properly over the last few months, hope to get some riding footage soon.

Will also do a 'long term ownership' vid of the Toce at some stage too.
You got a GoPro Tash?
 
Top