Search results

  1. D

    Radiator replacement

    I'm just going by there facts and the test that exist online. I'm not sure where you got your information but prop is less efficient at low Temps but better at high and who really cares when either the Temps far exceed the service requirements. All of the pictured products are directly...
  2. D

    Radiator replacement

    I dont know the physics and I'm not an chemical engineer so I won't even start to argue this or that🙃. I do know a lot of well respected companies make a similar product and they all retain or have you use water... I do know many race tracks don't allow antifreeze in your motor in case you crash...
  3. D

    Radiator replacement

    I never realized that ABS could be so intrusive. I think you will loose most of the fluid anyway so why not replace it with high performance synthetic, non toxic stuff that is supposed to make you bike run cooler...I use the Starbright brand because that's all they do...make radiator fluid. I...
  4. D

    Titax Wheels Mounted

    You can find really lightweight rear sprockets at Sprocketcenter.com. They List Titax now. Their Superlite in Hard Anodized Aluminum or Steel is hard to beat. Renthal, AFAM, and Driven also make sprockets to fit the Titax bolt pattern which is shared with BST, Robo, OZ, and Marchesini. The...
  5. D

    Titax Wheels Mounted

    This guy bought a set of OZ for a Kaw directly from the factory. Not a new model, no new design work or engineering. He also paid full price when he ordered them. He waited almost four months!!!!! You paid less than half retail waited 6 months during Covid. I'm sure Lumir would have been happy...
  6. D

    Titax Wheels Mounted

    Yes I can confirm your wheels are on the way. Once you get tracking the delivery time is short. They will arrive in one well packed box. Please do your best to forget the long delay....Impossible right...lol....But please post photos, unboxing, your first impressions etc. Thank you very much!!!
  7. D

    Titax Wheels Mounted

    Ten Racing I also apologize for the long wait.. I can assure you though through this whole process Lumir and his Brother have not been sitting on their hands. There were a couple self inflicted wounds.. First we underestimated the time it would take to bring a new design to fruition setting up...
  8. D

    Titax Wheels Mounted

    I agree and believe me I tell Lumir and his brother the bad post and the good post. We are close but trust me there is tension sometimes because it's important we do our best. The screwed up thing is I have a big list of bikes that I have fitments for that I can deliver in 3 weeks or less...I...
  9. D

    Titax Wheels Mounted

    I said something to Lumir about it. Thanks I will inform him further. His response was that it wouldn't be a big deal to reconfigure the adapter. That being said it means a new part, back to the anodizer etc. As long as we stay ahead it won't mean more wait for the customer.
  10. D

    Titax Wheels Mounted

    The forum members asked to see a full Mockup not just photos or something that might be taken as a lie. So asked Lumir as soon as the wheels are ready to mount them for you. I'm gonna say with as most confidence as I can that the 6in wheelsets will start shipping before the end of the month. I...
  11. D

    Titax Wheels Mounted

    As far as the 2022 ABS. As long as they have not moved the trigger wheel there won't be an issue. If there is we will move it accordingly to accommodate. We don't think it will be an issue.
  12. D

    Titax Wheels Mounted

    I will get an answer for you. Here are some Pictures of Rickey Gadson on his Gen1 Turbo ZX10R. It makes 500hp. He beat the record last weekend in Maryland riding on Titax. We sent him a set with ceramic bearings which are also lighter. There was definitely and improvement in his ET after he...
  13. D

    Titax Wheels Mounted

    Looooooonnnnngggggggg TIME COMING. Arrival before the end of the month. She is one sexy unit!!
  14. D

    The running thread for off topic discussions

    I believe one of my last post stated the ship date would be around the 10th. I think. I said I wanted to be 100% sure before I carved it in stone. I will put this out there....The guys with 6" FTR wheels will get tracking numbers on the 15th. Please don't kill me if it slides a few days for...
  15. D

    The running thread for off topic discussions

    Just so happens Rickey Gadson has good taste like you folks and he is running RED too. 😜 He had a little trouble mounting them because he never told us the inside dimensions of the Roaring Toyz extended swingarm. And like a dumb @@# I failed to see this issue before it happened. Anyway as you...
  16. D

    17" wheels!

    I know I have told Lumir not say anything that isn't 100% accurate but often he doesn't want to repeat himself because you will think he is crazy. Plus he doesn't like to write much because his English isn't perfect in his eyes. In the photo some of your adapters are not finished yet because...
  17. D

    17" wheels!

    I hear you totally. I myself went through a long period of waiting and it's the only reason I posted this. I did expect a chorus of cheers or even a thank you. I just gave you what I had and I wanted to let you know that I read all of your post and I have relayed them to Lumir. I wasn't part of...
  18. D

    17" wheels!

    Not sure if you have these photos but I figured I would post them for you. Again thank you all very much 🙏 for your patience. We really do appreciate you and thank you very much for choosing Titax!
  19. D

    17" wheels!

    By the way I said 45 degree I meant 83degree Italian Made valve stems. You will need the 8.3mm size. What's most important is the machined threads where the Schrader Valve Screws in. The cheap variety doesn't tighten properly and they also move around on the wheel. Here are some photos of your...
  20. D

    17" wheels!

    Sorry the pictures look a little blury...not sure why. Do yourself a favor source a set of Italian made 45 degree valve stems and get some high gloss black wheel weights. You dont want to jank them up with anything else. Don't skimp on the valves either trust me. All the best to you guys and I...
Top