Omohundro’s FTR

Omohundro

Member
Love the idea of that mo-door gizmo, never seen that before - might need to see if I can get something similar for my garage.

How come you had to install a secondary battery tender lead?
These bikes have a factory installed SAE connector on the left side under the fuse cover.
So I am using the plug under the fuse box for the Mo-Door wiring and I would just rather not remove that panel every time I want to charge it.
 

Omohundro

Member
So I saw someone her got the rear tire hugger and I really liked it. Ordered it straight from Powerbronze in raw plastic (I planed on painting it Nighthawk Black) but that never happened. 66C88D00-622E-40A1-BA1E-94A913C5C1A5.jpeg
Shortly after the tire hugger I got the rear seat cowl that only comes in carbon fiber. I was going to paint it black (also never happened). Man I was hooked when I saw the carbon fiber, what kinda person would paint over carbon fiber (right). That started a big purchase.
E832E2B9-9E88-4E4B-9272-5AB1FD628B92.jpeg
 

Breto

Well-known member
Yeah carbon is addictive…I just got the front guard to match the rear cowl…on the hunt for the air box covers now…👍😎
 

Omohundro

Member
I didn’t really know what to do with the tire hugger, it didn’t match anything at this point. First I wrapped it with some carbon fiber wrap, it looked okay but I thought I could do better. So I decided to wrap it with real carbon fiber, lots of work. First picture is the wrap. 2D78375A-060C-46B0-BADD-6F9C2AB920A1.jpeg
here is the process for using actual carbon fiber, kinda like fiberglass work.
lots of sanding and re-coating. 4899A75B-4D6D-4A54-B1C2-388C9DA1289D.jpeg3762CD20-E5E0-449A-B986-A786D4C71F33.jpegA05095E6-954A-4422-830D-A7AFC01532CD.jpegED8A7B2C-CF29-4BD0-B5EE-B5FCEF93C2D8.jpegF588E38A-4B2B-4B15-BB26-8D611F70203B.jpegCC1476C0-3738-4057-8A30-2E98395D7E6E.jpeg97994EC0-EF83-44A3-A995-CC582A4EFA8D.jpeg479E3D7F-5DF4-4963-BBD5-9A11A00893B1.jpegit’s not perfect my no means, but I’m happy with it.
 

Omohundro

Member
Next project is swapping the rear wheel for the 22 17” and a 190 tire. The wheel is on a big back order, so going to be December before this gets done. I do have the tire tho.
7B58218C-430B-453A-B3C7-69984896FD0E.jpeg
5F143664-42C7-4006-98F5-5326B9C68D1A.jpeg
 

motocroft

Active member
After I untaped mine from the loom it just sits behind that cover. I just reach in and grab it and then tuck it back in when it’s charged…👍😎
Yep, same here. It's free for when I need it and tucked back otherwise.
 

motocroft

Active member
I didn’t really know what to do with the tire hugger, it didn’t match anything at this point. First I wrapped it with some carbon fiber wrap, it looked okay but I thought I could do better. So I decided to wrap it with real carbon fiber, lots of work. First picture is the wrap. View attachment 4800
here is the process for using actual carbon fiber, kinda like fiberglass work.
lots of sanding and re-coating. View attachment 4802View attachment 4803View attachment 4804View attachment 4805View attachment 4806View attachment 4807View attachment 4808View attachment 4809it’s not perfect my no means, but I’m happy with it.
Great result, well done man.
 
Top