motocroft
Active member
I did search but couldn't find anything which answered my question.
I've got a 2022 FTR which has Ohlins forks and my current front stand (Kaneg, generic) will not be suitable as the left fork leg is fouled by the fork clamp bolt and the right leg is fouled by the ABS sensor.
I'm looking for a headstem/triple tree front stand - does anyone use one with their FTR? Any recommendations?
For the rear, I've also got a current Kaneg generic rear stand with hook pickups for spools - this is just slightly too narrow for the FTR.
I'm using R&G cotton reel spools and I am about 5mm short on clearance. Again - any recommendations for a stand that is at least 395 - 400mm wide (min width between pickup hooks)
Total width of span centre-centre on the pickup spools = 335 + 2(30) ==> 395mm
Thanks in advance legends - let the brains trust provide!
I've got a 2022 FTR which has Ohlins forks and my current front stand (Kaneg, generic) will not be suitable as the left fork leg is fouled by the fork clamp bolt and the right leg is fouled by the ABS sensor.
I'm looking for a headstem/triple tree front stand - does anyone use one with their FTR? Any recommendations?
For the rear, I've also got a current Kaneg generic rear stand with hook pickups for spools - this is just slightly too narrow for the FTR.
I'm using R&G cotton reel spools and I am about 5mm short on clearance. Again - any recommendations for a stand that is at least 395 - 400mm wide (min width between pickup hooks)
Total width of span centre-centre on the pickup spools = 335 + 2(30) ==> 395mm
Thanks in advance legends - let the brains trust provide!