Recent content by addfrench

Got 'em working just fine. After tinkering for a minute with those connectors to get the pins to line up correctly, I now have functioning bar end turn signals. Thanks all for your help. And, for the record of anyone in the future reading this, I was wrong about my wiring. It must've been poor...

Thanks everyone for your help. I ordered the connectors and they should arrive on Thursday. I'll give this another go with the information provided. Cheers!

Thanks! I ordered the connectors. I don't have the service manual. Any idea which red/black wires connect to or line up with which purple/blue and green/black wires?

My wife just informed me that I'm just seeing the colors wrong. Basically, here's a breakdown of my wiring: Left Turn Signal: Harness (Blue/Purple) into which wire (Red/Black)? Right Turn Signal: Harness (Green/Black) into which wire (Red/Black)? (I'm assuming this one is straightforward, red...

Quick question. I went to replace my front turn signals with the Motogadget M-Blaze Discs in the handlebar ends. I've got everything installed fine and I'm on to the wiring. I unplugged and removed my OEM front turn signals and I have a connector on one end and bare wire on the other. Where do I...

Hey everyone, I just purchased a stock 2019 with the Akro upswept high exhaust. Reading only just now about things like the stalling issue that others seem to be experiencing, and I'm a bit worried about it. I'm reading that a tune will fix it, but I know next to nothing about tuning the bike...

Hi Zilonis! I'm also from MA and I'm also curious how some mods I want to make will fair in state inspections. Good luck! Enjoy the bike!

Thanks for the reply! Yeah, I was definitely on board with splicing/soldering the wires. I just wanted to make sure they were the same wire spec across the US and European models so that everything lines up and works with the bike. Sounds like you've had luck with making them work on yours, so I...

Hello, I’m looking to fit a side bag on my FTR S and I need smaller turn signals in order for it to fit. (My current setup has the Indian high license mount and the turn signals are mounted below the seat on the back). I was looking at smaller solutions like the Motogadget m.blaze bar end...