2022 Side Stand

[nnm505]

According to my tech the '22 side stand will not fit the '19 model.

 

[ferraiolo1]

It fits. But it’s 2in shorter. Too short if you only lowered your bike an inch or so

 

[nnm505]

Tech says the stop on the upper end is too short.
Installed the Hypertech kit.

 

[Max Kool]

Hyperpro?

 

[ferraiolo1]

You will need to cut/weld your stand for that kit

 

[nnm505]

That's the plan now.

 

[edgelett]

That's the plan now.

it's a pretty simple job.
i took 15mm out (well...my boyfriend did) based on some suggestions from others.
I recommend taking 20mm out.

 

[nnm505]

Thanks, I was thinking of an inch.

 

[edgelett]

Thanks, I was thinking of an inch.

with the lowering kit that;'s probably about right