I removed my bezel and the rubber ignition switch ring. I can't figure out how to re-install. Help!The base, the s/rr, rally, carbon rr, and carbon r.
if you add any of those bikes in the Indian website it will give you the pn for that bike for the center bezel.
Thanks! I should explain better. When I removed the airbox covers and the bezel, I pulled the rubber ring off as well. Now I'm trying to re-install everything and I don't see how the rubber part will come through the bezel.
Does the ignition cap need to be removed? If so, how?Thanks! I should explain better. When I removed the airbox covers and the bezel, I pulled the rubber ring off as well. Now I'm trying to re-install everything and I don't see how the rubber part will come through the bezel.
Haven't been able to make that work.The rubber grommet sits around the ignition lock bezel, which comes off with a quarter turn counter clockwise. It does not come through the cover, it’s just wedged against the bottom of it.
see here watch the video, it’s in there around the 1:30 mark: https://www.indianmotorcycle.com/en-us/self-help/article/KA-01716/
Got it, thank you! I was really over thinking! lolHaven't been able to make that work.
Yes, thanks!@donlycan solved?
Wasn´t there 6 month ago and there are more info´s now. Thanx for.The base, the s/rr, rally, carbon rr, and carbon r.
if you add any of those bikes in the Indian website it will give you the pn for that bike for the center bezel.