Agmofstamford
New member
Recently installed the HT QS. It's pretty much plug & play.....Gaining access to the coils at each cylinder turned out being a little involved..... but doable if you're mechanically capable. If not I highly recommend getting some help before you dive in! Removal of the left side sub-frame, gas tank and air-box was needed in order to do so and route the wires neatly.
After the initial set-up, I had some shifting issues that took a couple of emails to HT to get it sorted out. The shifts are now super smooth and shifts perfectly at all RPM ranges.
Very happy with the final result....and highly recommended. If you're thinking about it DO IT!
I'd be glad to help with anything I ran into as advice. Good-Luck!
After the initial set-up, I had some shifting issues that took a couple of emails to HT to get it sorted out. The shifts are now super smooth and shifts perfectly at all RPM ranges.
Very happy with the final result....and highly recommended. If you're thinking about it DO IT!
I'd be glad to help with anything I ran into as advice. Good-Luck!
Last edited: