Jyonish
Member
So I was installing an aeromach tail tidy (plate relocation - or whatever you want to call it)
I was very slow and took my time - I touched nothing!
Meaning sure I took the rear plate/light arm off and removed the side to reroute the wire (of course disconnected the rear signal/plate wires)
But again - did not touch anything, knock anything lose, bump anything, break anything, ect ...
So when I installed and re-connected the wires prior to putting everything back together - everything worked except the left turn signal BUT when i turned bike off the left signal would come on (but would go off after a few minutes) - No check engine codes.
I disconnected wires, took mount off, checked everything, put back together and boom, everything worked fine.
I put everything back together (carefully - had no issues, nothing pinched, ect ..) and now None of the signals work with several check engine codes:
Codes are:
520545
520546
520547
520548
520209
520210
I believe 520209 and 520210 are O2 sensors - not sure why as again, didnt touch/short anything - the install was pretty simple and straight forward
And the other codes i have no clue
If have any info - please help - hoping is something simple
I was very slow and took my time - I touched nothing!
Meaning sure I took the rear plate/light arm off and removed the side to reroute the wire (of course disconnected the rear signal/plate wires)
But again - did not touch anything, knock anything lose, bump anything, break anything, ect ...
So when I installed and re-connected the wires prior to putting everything back together - everything worked except the left turn signal BUT when i turned bike off the left signal would come on (but would go off after a few minutes) - No check engine codes.
I disconnected wires, took mount off, checked everything, put back together and boom, everything worked fine.
I put everything back together (carefully - had no issues, nothing pinched, ect ..) and now None of the signals work with several check engine codes:
Codes are:
520545
520546
520547
520548
520209
520210
I believe 520209 and 520210 are O2 sensors - not sure why as again, didnt touch/short anything - the install was pretty simple and straight forward
And the other codes i have no clue
If have any info - please help - hoping is something simple