Those who replaced their clutch levers, how do you remove the cylinder from the OEM lever?

[Rjackg]

How did you guys remove the cylinder out of the OEM clutch lever to put into the aftermarket lever? Mine won’t come out at all

 

[Max Kool]

Is that even necessary with the clutch lever?

 

[Rjackg]

Is that even necessary with the clutch lever?

I bought the rizoma clutch lever that needs the stock bushing to install it on the bike. The brake lever comes with the bushing

 

[edgelett]

I bought the rizoma clutch lever that needs the stock bushing to install it on the bike. The brake lever comes with the bushing

ah right for the Rizomas?
Take the original clutch and push it out using a small socket and a hammer.

 

[edgelett]

ah right for the Rizomas?
Take the original clutch and push it out using a small socket and a hammer.

hang on - I just re read. Rizoma not Raximo.
sorry I thought you meant Raximo.

not sure about Rizoma, maybe check the manual?

 

[ciphfer]

You are going to have to press it out of the handle. If you have a vise and a smaller diameter socket, that should take care of it.

 

[DeplorableOne]

Do you mean for the brake? I'm having issues getting the clutch lever off and this came up in a search