Ok bit stuck now :( anyone have a copy of The manual 7.14 for Seat Removal / Installation and 4.21 for tank removal as undone a lot of stuff and still not able to get the seat frame to move !!
To clarify, they sent instructions and the instructions said to remove the rear outlet pipe you need to remove seat and tank and to do that you need to get hold of the factory service manual.
Trying to remove the rear pipe section that fits to the rear of the engine block, got the main pipe section at the front off ok but the rear has so little space not sure if I need to remove the whole seat section or something else similar to get to the nuts holding the rear onto the engine...
Ive been using these for last month or so and really like them https://www.byeaos.com/pages/slimbuds but never used any other kind of comms so have no comparison.
Did you add additional ceramic coating or are you referring to the standard ceramic shield that sits between the exhaust and the metal outer shield plates?
Only used the Beeline on 3 rides so far with the longest ride being 2 hours but with limited use I am really liking it. I used to use my iPhone for navigation and it took a bit of getting used to the limited display but now I really like the limited distraction. Once you get used to using the...
One of the first things I noticed about the FTR was how upright it sits on the stand. I already considered taking a few cm of the stand as I have felt nervous leaving it a couple of times now where the position it was in seemed almost completely upright and so maybe it would fall onto the non...
I am the man who with no drink in sight, kicked up the side stand of my 999, forgot I had just done it, let go so it could rest on the now not deployed stand and shed a small tear as it fell in slow motion into the side of my wife’s car !!! To be fair I haven’t made that mistake again. I shed...
I have found that the new rearset solved the issue I had with the pegs getting in the way of being able to get the kickstand down correctly, loads of space now. I am not sure about lock on the KS as a standard, but I don't have it on mine and can't remember a bike that I have owned with it :)
After I fitted my S&S system I was hopeful the cold stalls might go away, with the cat removed and a cleaner breathing system but no joy, still had at least one cold stall most days. Since the PV3 tune not one stall and it was colder last week than when I first picked up the bike. Of all the...
My Mods to date in order of what I did and who I purchased it from in brackets
Oxford Bobbins
Oxford Hotgrip Premium
Conti Road Attack 3 120/70ZR19 and 160/60ZR18 (EMJ Bike Tyres)
Front Fork re-valve (Iron Wheels Wales)
Rear Shock re-valve, re-spring and bladder conversion (Iron Wheels...
Passenger ones look nice and match the Giles well I think. I actually like the Giles non flip but as I purchased the flips felt the need to put them on.
I used the following and removed the dash to attach and it just fitted if a little snug.
1 x Double Socket Short Arm for 1" Ball (RAM-B-201-A)
1 x Torque™ Handlebar and Rail Base with 1" Ball 1.125" to 1.5" Diameter
(RAM-B-408-112-15)
Will post some pictures at the weekend, really happy with the final rear light set up (which I got installed in time to be able to ride my bike home) and hope to have the front sorted as well on sat so will share that as well.
It didnt look quite so odd from some angles, that picture is probably the worst, the bench seat was good for long trips so I could mount my Keiga tail pack.
I am just making some adjustments to the underseat of the tracker cowel on my FTR so I can mount the Kreiga on it as well.